Setting Tool Series MB

Part Number

Series MB

Material

Tool Steel, Heat Treated

Overview

Setting tool for Koenig Series MB push-type expanders. Available to install MB ball type Expander sealing plugs in diameters from 3.00mm-22.0mm. For CV plugs, MB Inch plugs please see other setting tools.

Made of heat treated tool steel at HRC. 50 hardness for durability. The Koenig Series MB setting tool is compatible for use with both the Express 3000/5000 Table Presses. Alternatively, small quantities or single parts can be installed with a hammer and this setting tool. Installation can also be done with an arbor press. Stroke travel should be limited when using a press due to difficulty controlling insertion forces.

Product Highlights

Hardness approx. HRC 50
For Series MB plugs Ø3.0mm-22.0mm
Recommended for use with Express 3000/5000 hydropneumatic presses.

Technical Specs

Hardness

Approx. HRC 50

Dimensions In

Part Number	d1 Expander	d3 -120	l1	d2	l2	x ±0.2	Weight in gram/pcs.

MB 030	3	10	100	2.8	10	0.4	55
MB 040	4	10	100	3.8	10	0.2	55
MB 050	5	10	100	4.8	12	0.4	55
MB 060	6	10	100	5.8	15	0.4	55
MB 070	7	10	100	6.8	18	0.4	55
MB 080	8	10	100	7.8	20	0.3	55
MB 090	9	14	100	8.8	22	0.4	120
MB 100	10	14	100	9.8	25	0.4	120
MB 120	12	14	150	11.7	30	0.4	180
MB 140	14	20	150	13.7	35	0.4	350
MB 160	16	20	150	15.7	40	0.6	350
MB 180	18	20	150	17.7	45	0.6	350
MB 200	20	25	150	19.7	50	0.8	550
MB 220	22	25	150	21.7	55	0.8	550

RECOMMENDED SETTING EQUIPMENT FOR SERIES MB
EXPRESS 3000	Hydropneumatic Table Press	See EXPRESS 3000 page
EXPRESS 5000	Hydropneumatic Table Press	See EXPRESS 5000 page

Series MB Setting Tools

Required Installation Lengths Expanders

Series MB/CV Plug Removal Instructions

Series MB/CV Installation Instructions

GET IN TOUCH

For more information on the Koenig range, to chat about an application or to request an engineer to call or visit, please don’t hesitate to call or fill out the below form.

"*" indicates required fields